This was a restoration I did for a couple living in Hackleton, Northampton, who had just moved into their new home and wanted their recently discovered Quarry tiled hallway fully restored before their housewarming party.

Old Quarry tiled floor before restoration Hackleton

The couple had lifted up the carpet upon moving into the house to find a dirty and damaged floor beneath. It had been marked with glue around the edges where the carpet gripper rods had been stuck down upon installation. My clients had attempted to remove the unsightly glue marks themselves using a chisel and hammer. Unfortunately, the DIY job actually caused further damage to one tile, leading to the couple seeking the services of a professional to complete the job properly. It was especially important to have the floor ready quickly, as there was only ten days to go before the housewarming party.

Old Quarry tiled floor before restoration Hackleton

Stripping and cleaning a Quarry tiled hallway

After providing the couple with a quote, I began working on the hallway. My first task was strip the Quarry tiles of the old sealer using a combination of black stripping pads and Tile Doctor Remove & Go, a multi-purpose product which contains both strpping and cleaning properties. Remove & Go was left to soak into the tiles before being scrubbed into the floor using a rotary scrubbing machine. After successfully breaking down the layers of old sealer, I rinsed the floor using clean water and soaked up the residue with a wet-vac machine.

Old Quarry tiled floor before restoration Hackleton

The next stage of the job involved removing the old glue marks by hand from around the edges of the hallway. This was painstaking work in which I utilised both a scraper and a hand brush to carefully rid the tiles of these blemishes. Working in small, two metre sections of the floor, I then applied a second coat of Remove & Go, allowed it to soak into the area for a further ten minutes, and then rinsed it with clean water. During my inspection of the floor I also noticed a few splashes of paint, which I duly removed by hand.

Sealing a Quarry tiled hallway

Due to the pressure on time leading up to the housewarming party, I needed to speed up the drying process. I did this by installing a dehumidifier and a turbo fan. The floor was then left to dry for more than 24 hours before I returned to complete the sealing.

Upon my return I took damp meter readings in order to determine which sealer would be the best to use. I resolved to use Tile Doctor Colour Grow, an impregnating sealer which is fully breathable, allowing dampness to escape from this type of tile. This is important, as the tiles had been first installed many years ago with no damp proof membrane. As the sealer dried it provided the floor with a nice, light sheen. Since Colour Grow is also specially designed for colour intensification, the fantastic natural shades and colours in the Quarry were really brought to life again.

Old Quarry tiled floor after restoration Hackleton Old Quarry tiled floor after restoration Hackleton

My clients were extremely pleased with the results, with the prompt and efficient service ensuring that the job was completed in good time for their housewarming party.

Old Quarry tiled floor after restoration Hackleton

 
 
Source: Professional Tile, Stone and Grout cleaning services in Northamptonshire