Stripping Tile Paint from an Old Quarry Tiled Conservatory Floor in Basildon, Berkshire

We suspect that the Old Quarry tiles laid in the conservatory of this Victorian house in Basildon, had been reclaimed from other areas of the property as the age of the tile didn’t match the time the conservatory was installed. Not only were the quarry tiles old but they had been covered in layers of red tile paint by previous home owners. This had now begun to crack and chip and look unpleasant, so the customer wanted the old paint removed and the tiles sealed for a more natural look.

Reclaimed Painted Quarry Tile Basildon Before Restoration

I headed over to Basildon to take a look at the Quarry Tiled Floor; Basildon in Berkshire is not to be confused with the large town of Basildon in Essex, this Basildon is approximately 7 miles west of reading and is made up of the two small villages of Upper and Lower Basildon. Having taken a look at the tiles and run some tests I was confident that the floor could be restored successfully I gave them a quote for the work, which was accepted, and a date agreed for me to return and get the work done.

Reclaimed Painted Quarry Tile Basildon Before Restoration

Removing Tile Paint From a Quarry Tiled Conservatory Floor

The first job was to tackle the layers of tile paint. Fortunately for me the paint had weakened over time and was fairly flaky in places which meant I could carefully peel away the dry paint with a blade attached to a scraper. This was a slow process but reduced the amount of mess that would have been produced if I was to use chemicals from the start.

Reclaimed Painted Quarry Tile Basildon During Restoration

Once I had removed all I could by hand the remaining paint that had fallen into the grooves and grout joints had to be removed using a strong dilution of Tile Doctor Remove and Go which is a coatings remover designed for use on tile, stone and grout. The process worked well but I had issues with the product drying out due to the sheer heat in the conservatory (must have been 30 degrees and above!). The Tile Doctor Remove and Go works best when it is left to dwell on the tiles for some time. To overcome this obstacle, I applied Tile Doctor Nanotech HBU Remover and covered it over with plastic sheeting to stop it drying out too quickly.

Reclaimed Painted Quarry Tile Basildon During Restoration

The HBU Remover which stands for Heavy Build Up, did the trick and after a couple of hours the tiles where ready to be cleaned using a black scrubbing pad fitted to a rotary machine and then rinsed off. The soiled water was then removed using a wet vacuum and after a further rinse was left to dry off overnight. Thankfully the high temperatures worked in our favour and helped dry the floor out and when I returned the next day it was ready to seal.

Sealing a Reclaimed Painted Quarry Tiled Conservatory Floor

The customer had decided on a matt finish, so I applied three coats of Tile Doctor Colour Grow which is a impregnating sealer that leaves the desired finish and has the advantage of intensifying the natural colour of the quarry tiles.

Reclaimed Painted Quarry Tile Basildon After Restoration

Overall the customer was very happy with the outcome and left the following feedback:

“Very happy with the end product, the tiles came up very clean once the paint was removed. Dennis was very professional and kept the working area clean and tidy. He kept us informed throughout the work. Will certainly use again and recommend to friends”

Reclaimed Painted Quarry Tile Basildon After Restoration

 

Source: Quarry Tile Cleaning and Renovation Service in Basildon, Berkshire

Restoring Old Quarry Tiles in a Reading Basement

These Yellow and Black Quarry tiles are though to be original feature of this Victorian house in Reading and the owner was keen to get them renovated. The tiles were in basement of the house and over the years the tiles had suffered from water damage due to various small floods, they were now heavily soiled and the most challenging task would be to remove a large build up of mortar and cement.

Yellow and Black Quarry Tiles Before Cleaning Reading Yellow and Black Quarry Tiles Before Cleaning Reading

I ran a test clean in a corner of the smallest room to demonstrate the cleaning process and although confident I could significantly improve the appearance of the Quarry tiles. I had to explain to my customer that due to the years of neglect the outcome would not be perfect, however the test clean went well and the customer was happy with the outcome so booked me in to do the work.

Yellow and Black Quarry Tiles Before Cleaning Reading

Soiled Quarry Tile Cleaning

The first issue to tackle was to remove the dirt and ingrain soil which I did by scrubbing in a strong mix of Tile Doctor Pro-Clean which is a strong tile and grout cleaner. The solution was left to soak in before ten minutes before being agitated with a black scrubbing pad fitted to a rotary machine. I then rinsed off the now soiled cleaning solution off using a hot water truck mounted extraction system.

Yellow and Black Quarry Tiles During Cleaning Reading
Now the ingrained dirt was taken care of, the most difficult task was to remove the cement/mortar built up that was covering a high percentage of the tiles. I did this using a combination of Tile Doctor products including Grout Clean-Up, Acid Gel and 50,100 grit diamond pads. I started with Grout Clean-up but found that Acid Gel worked better on this occasion. To deal with stubborn areas I left the Acid Gel to dwell overnight covered with plastic sheeting so it wouldn’t dry out.

The Acid Gel worked wonders and I was able to complete the cleaning process when I came back the next day giving the floor another rinse with the hot water extraction system. With the quarry tiles now clear I able to do a final spot check and used hand held burnishing blocks and very coarse 50 grit milling pad followed by a 100 grit diamond pad and another rinse to finish it off.

Quarry Tile Sealing

After leaving the floor to dry out over the weekend it was ready to be sealed. We had agreed on giving the Quarry Tiles a matt finish so I used three coats of Tile Doctor Colour Grow which is a fully breathable colour enhancing sealer that works well on old clay tiles.

Yellow and Black Quarry Tiles After Cleaning Reading Yellow and Black Quarry Tiles After Cleaning Reading

I’m happy to say the floor turned out very well considering its condition, certainly my customer was very happy with the outcome and left the following feed back on the Tile Doctor Feedback system.

“Fantastic job – completely revived our Victorian cellar tiles, the before and after photos accurately show the difference the work has made! Also impressed by Dennis’s communication and responsiveness to our needs with the work”.

Yellow and Black Quarry Tiles After Cleaning Reading

 
 
Source: Quarry Tile Cleaning and Maintenance Service in Reading, Berkshire

Neglected Victorian Quarry Tiles Transformed

We were asked to restore this Original Victorian Quarry tiled floor following a major refurbishment of a Grade 1 listed mansion in Pangbourne, Berkshire. The tiles has seen many years of neglect and as you can see from the photo below it was not given much thought or care by the builders and decorators who had been working on the property.

Neglected Victorian Quarry Tiles

Cleaning Victorian Quarry Tiles

We set about stripping and cleaning the floor of all the paint and dirt that had been left to accumulate on its surface over the years starting with a strong dilution of Tile Doctor Pro-Clean worked into the Quarry tiles using a rotary machine fitted with a black scrubbing pad. This was removed using a wet and dry vacuum and followed by hours of detailed cleaning using Tile Doctor Remove and Go mixed 50/50 with NanoTech Ultra Clean which adds Nano sized abrasive particles to the solution to make a more effective coatings remover. We allowed this to dwell for a short while before agitating it with a rotary machine again fitted with a black scrubbing pad working the solution into the floor, this treatment tackled the stubborn paint and all sorts of other residues. Once we were happy with floor it was given a good rinse down with clean water and then left to dry.

Refurbished Victorian Quarry Tiles

Sealing Quarry Tiles

Once the Quarry Tiles were dry we set about sealing them, a low sheen finish was required so four coats of Tile Doctor Seal and Go were applied, it’s a water based sealer that will protect the surface going forward. The Main contractor could not believe we managed to get the floor looking pristine and back to its original condition.
 
 
Source: Transforming a neglected Victorian Quarry Tiled floor in Berkshire