Restoring a Quarry Tiled Kitchen Floor Hidden under Lino in Cambridge

This job was for a lovely old lady in Cambridge, her kitchen floor had been covered with a wood effect Lino thirty years earlier and she felt it was time to have it removed and have the original Kitchen Quarry tiles underneath restored.

Kitchen Quarry Tiled Floor Covered with Lino Cambridge Kitchen Quarry Tiled Floor Covered with Lino Cambridge

The lino was good quality having stood the test of time however to ensure the lino didn’t sink into the grout lines the whole floor had been levelled with some sort of screed which would need to be carefully removed.

Kitchen Quarry Tiled Floor with Lino Removed Cambridge Kitchen Quarry Tiled Floor with Lino Removed Cambridge

Removing the Linoleum covering and cleaning the floor

My first task was to carefully scrape off as much of the linoleum covering as possible without damaging the floor beneath. I managed toe remove most of the screed by lightly chipping away with a chisel and hammer followed by a blade to scrape as much screed as possible off the tile and grout.

To deal with the remaining screed I used a strong dilution of Tile Doctor Grout Clean-up which is an acidic product and needs to be applied with care. It was scrubbed in using a rotary machine running on slow speed and fitted with a black scrubbing pad. To remove the soil I used our truck mounted hot water extraction machine which applies hot water under pressure with a special lance that simultaneously extracts the waste back to a tank on the van.

The last stage of cleaning was to apply a coat of Tile Doctor Oxy-Gel to remove any previous sealer that may still be present on the tile. As well as using the scrubbing machine I also used a stiff brush along the grout lines as well. Final step was another rinse with the truck mounted extraction machine before leaving the floor to dry off fully overnight.

Kitchen Quarry Tiled Floor Before Restoration Cambridge Kitchen Quarry Tiled Floor Before Restoration Cambridge

Sealing Kitchen Quarry Tiles

When I returned to the property I used a damp meter to test the floor, making sure that the surface was dry enough to commence sealing (as any excess solution can affect the performance of the sealer). My sealer of choice was Tile Doctor Seal & Go Extra, a topical sealer which works well on Quarry tiles restoring appearance and providing a nice finish along with durable protection. This particular sealer is also suitable for floors where damp maybe an issue and with an old floor like this installed before the invention of Damp Proof Membranes choosing the right sealer is very important to avoid issues with efflorescence.

Kitchen Quarry Tiled Floor After Restoration Cambridge Kitchen Quarry Tiled Floor After Restoration Cambridge

The floor was completely transformed and the client was extremely happy with the out come and even left the following lengthy testimonial on the Tile Doctor Feedback system which is always appreciated.

“Tom did excellent work on quite a tricky job. Our kitchen tiles are over sixty years old. Tom took up and disposed of our old kitchen Lino, removed the layers of concrete screed, then buffed, glossed and sealed the original tiles until they shone like new! The natural salts worked their way to the surface of the tiles just like Tom said would happen, and a fortnight later Tom returned to re-surface and re-gloss the tiles. The floor now looks great. Tom was very professional throughout and the work was no easy job to accomplish, so he has done a great job. We are very pleased with our kitchen floor, which now has a new lease of life. I would recommend the Tile Doctor if you need a floor restored at any time.
Miss Webber, Cambridge 02 August 2017”
 
 
Source: Quarry Tile Cleaning and Maintenance Service in Cambridgeshire

Quarry Tiled Floor Restored in Shop to Flat Conversion in Oxford

This ground floor flat in the City of Oxford had been converted from a shop which as you can imagine, was quite complex. One significant element involved in the conversation was the restoration of an old Quarry tiled floor which ran through the main hallway and had for many years been covered in a commercial linoleum covering.

When the linoleum covering was removed, the sheer amount of glue which had been used to affix it had completely ruined the appearance and condition of the Quarry tiles. There was also a lot of concrete in the bathroom, and our client was keen to have this removed in the hope that the tiles beneath were salvageable.

Quarry Tiled Floor Oxford Before Restoration Quarry Tiled Floor Oxford Before Restoration

Removing Concrete and Glue Stains from a Quarry Tiled Floor

My first task at the property was to deal with the adhesive. I covered the entire floor area with Tile Doctor Remove and Go and then covered it with a plastic sheet and leaving it to soak into the glue and break it down overnight. Remove and Go is powerful stripper with a long-dwell time, formulated to break down adhesives and paint stains, amongst other coatings.

I returned the next day and, removing the plastic sheeting, I scrubbed the floor with a carbon brush attached to a rotary floor scrubber to remove the huge glue deposits. I worked in sections, rinsing each area of the floor with water after it had been scrubbed. Once I had finished the entire floor there was still some glue remaining, so I covered it again with a solution of Remove and Go combined with Tile Doctor HBU Nanotech, which utilises nano-sized particles to get underneath tough stains, dissolve them, and lift them out. I left this solution on the floor for about two hours to dwell and scrubbed it again.

During the next day of work, I used a very coarse 100 grit diamond burnishing pad to manually grind away the remaining stubborn bits of glue. Paying attention to the bathroom, I used a 50-grit coarse milling pad followed up with a 100-grit diamond burnishing pad to do the same to the area of concrete.

The next part of the process was to use Tile Doctor Grout Clean Up to acid wash the floor. This was successful in removing the last bits of cement and the remaining residue of the glue. To complete the cleaning process, I then rinsed the floor with plenty of water and vacuumed up any soiled solution.

Sealing a Quarry Tiled Floor

I opted to leave the floor alone for a couple of days to fully dry off so that it could be sealed upon my return. This is crucial as any moisture or damp issues can damage the performance of the sealer and expose the floor to further ingrained dirt and staining.

To seal the floor, I used Tile Doctor Colour Grow. This is an impregnating sealer that also enhances the natural reddish shades in the Quarry. I applied two coats of the sealer, giving the floor the natural look matte finish the customer desired.

Quarry Tiled Floor Oxford After Restoration Quarry Tiled Floor Oxford After Restoration

The customer was very impressed with the results of this thorough restoration. She even left the following feedback:

“I cannot recommend this service enough. The Oxford Tile Doctor (Barry) was a superstar: he cleaned up the tiles in my hallway, which were covered in a very thick layer of glue, and removed concrete from the tiles. They now look superb and I’m really happy with the outcome. Barry was always on time, considerate, and kept me up to date. The quote for the job was exactly right. I would not hesitate to recommend him.”
 
 
Source: Quarry Tile Cleaning and Restoration in Oxfordshire