Improving Salt Damaged Quarry Tiled Floor in Hartlebury, Worcestershire

I was contacted by the new owner of a property in Hartlebury who needed help renovating a Quarry tiled floor in their dining room. The house was full of original period features however the Quarry tiles had experienced a lot of wear over the years and were now in need of a deep clean and seal. Hartlebury by the way is a lovely village close to the larger town of Kidderminster and famous for Hartlebury Castle which was built in the mid-13th century.

There were a few tiles which had experienced salt damage in the past and I explained that as a Tile Doctor I could change these tiles for her to give the best finish. The customer however, decided she would like to keep the original floor without changing the tiles and just concentrate on the clean and seal. I conducted a test clean on part of the floor to demonstrate the difference we could achieve and also work out the best products for the floor. The test went well and happy with the results my quote was accepted, and the work scheduled.

Salt Damaged Quarry Tiled Floor Before Renovation Hartlebury

I have mentioned this before but it’s worth pointing out again that damp proof membranes did not become common until the 1970’s. Properties built before then were subject to damp rising through the sub floor drawn up by evaporation at the floor surface. Alkaline salt deposits would also be brought up with the moisture and leave a white deposit on the surface of the tile. This process is commonly known as efflorescence and can cause damage to tiles which are coated with a non-breathable coating. In extreme circumstances where the whole floor is trapping moisture under the surface then it can spread outwards into the walls leading to rising damp.

Deep Cleaning a Quarry Tiled Dining Room Floor

My first step was to concentrate on the edges of the floor using a wire brush and Tile Doctor Remove and Go on the difficult areas and paint marks. I then sprayed the rest of the floor with some more Tile Doctor Remove and Go and left it to dwell for ten minutes. Once the dirt had started to lift, I used my rotary scrubber with a black pad and worked the solution in. The soiled product was then rinsed off the floor with water and vacuumed away using a wet vacuum.

The next step was to remove the white efflorescence from the surface of the Quarry tiles and neutralise any alkaline salts within the tile. The best way to do this is to give the floor an acid wash. I use Tile Doctor Acid Gel for this purpose and being a Gel it’s very easy to control. Again, the product is worked into the floor using a rotary machine and black pad. The floor was then rinsed thoroughly and then vacuumed to remove all the soil and as much moisture as possible. After I had finished the floor looked much brighter.
Once I was happy the floor was clean and any trace of efflorescence removed, I finished for the day and left the floor to dry out fully overnight. I arranged to return the following day to seal the tiles.

Sealing a Quarry Tiled Dining Room Floor

The customer had requested a gloss finish however the inherent damp issues meant I would need to apply a fully breathable sealer that would allow moisture to rise thorough the Quarry tiles unimpeded. The solution was to apply Tile Doctor Seal and Go Extra, this a semi-gloss topical sealer which is fully breathable. This sealant leaves a beautiful finish and allows the natural colour of the tiles to shine through.

After using my damp test meter and making sure the floor was fully dry, I started the sealing process. The Quarry tiles were treated to five coats and the customer was very pleased and left some great feedback which I’ve copied below.

Mark was very efficient and professional. Worked hard and did a good job. Very pleased with results. Sue R., Hartlebury

Salt Damaged Quarry Tiled Floor After Renovation Hartlebury

Although we didn’t replace the damaged tiles, they were much improved and added character to the floor. Also, the new sealer will make them much easier for the customer to keep clean. For aftercare I recommended the use of Tile Doctor Neutral Tile Cleaner to keep the floor looking pristine, unlike harsher products you find in supermarkets it won’t damage the sealer prematurely.

Salt Damaged Quarry Tiled Floor After Renovation Hartlebury

 

Source: Quarry Tile Cleaning and Sealing Service in Hartlebury, Worcestershire

Restoring Old Quarry Tiles in a Reading Basement

These Yellow and Black Quarry tiles are though to be original feature of this Victorian house in Reading and the owner was keen to get them renovated. The tiles were in basement of the house and over the years the tiles had suffered from water damage due to various small floods, they were now heavily soiled and the most challenging task would be to remove a large build up of mortar and cement.

Yellow and Black Quarry Tiles Before Cleaning Reading Yellow and Black Quarry Tiles Before Cleaning Reading

I ran a test clean in a corner of the smallest room to demonstrate the cleaning process and although confident I could significantly improve the appearance of the Quarry tiles. I had to explain to my customer that due to the years of neglect the outcome would not be perfect, however the test clean went well and the customer was happy with the outcome so booked me in to do the work.

Yellow and Black Quarry Tiles Before Cleaning Reading

Soiled Quarry Tile Cleaning

The first issue to tackle was to remove the dirt and ingrain soil which I did by scrubbing in a strong mix of Tile Doctor Pro-Clean which is a strong tile and grout cleaner. The solution was left to soak in before ten minutes before being agitated with a black scrubbing pad fitted to a rotary machine. I then rinsed off the now soiled cleaning solution off using a hot water truck mounted extraction system.

Yellow and Black Quarry Tiles During Cleaning Reading
Now the ingrained dirt was taken care of, the most difficult task was to remove the cement/mortar built up that was covering a high percentage of the tiles. I did this using a combination of Tile Doctor products including Grout Clean-Up, Acid Gel and 50,100 grit diamond pads. I started with Grout Clean-up but found that Acid Gel worked better on this occasion. To deal with stubborn areas I left the Acid Gel to dwell overnight covered with plastic sheeting so it wouldn’t dry out.

The Acid Gel worked wonders and I was able to complete the cleaning process when I came back the next day giving the floor another rinse with the hot water extraction system. With the quarry tiles now clear I able to do a final spot check and used hand held burnishing blocks and very coarse 50 grit milling pad followed by a 100 grit diamond pad and another rinse to finish it off.

Quarry Tile Sealing

After leaving the floor to dry out over the weekend it was ready to be sealed. We had agreed on giving the Quarry Tiles a matt finish so I used three coats of Tile Doctor Colour Grow which is a fully breathable colour enhancing sealer that works well on old clay tiles.

Yellow and Black Quarry Tiles After Cleaning Reading Yellow and Black Quarry Tiles After Cleaning Reading

I’m happy to say the floor turned out very well considering its condition, certainly my customer was very happy with the outcome and left the following feed back on the Tile Doctor Feedback system.

“Fantastic job – completely revived our Victorian cellar tiles, the before and after photos accurately show the difference the work has made! Also impressed by Dennis’s communication and responsiveness to our needs with the work”.

Yellow and Black Quarry Tiles After Cleaning Reading

 
 
Source: Quarry Tile Cleaning and Maintenance Service in Reading, Berkshire

Removing Levelling Screed from Quarry Tiles in Surrey

Pictures below of a Quarry Tiled floor that a customer had discovered when taking up the lino at her house in Coulsdon. Realising the floor was original and worth saving she contacted Tile Doctor and I popped round to take a look.

A lot of the tiles had been covered in a screed to provide a flat base for the Lino and that would need removing. In order to be sure what treatments would work to remove the screen and successfully restore the Quarry tiles without causing any damage I ran a couple of tests and everything seemed ok.

Quarry Tiled Floor Before Renovation Coulsdon Quarry Tiled Floor Before Renovation Coulsdon

We could both see the job wasn’t going to be easy and would take some days to complete so I worked out a price which was accepted and we agreed a date for the work to start.

Quarry Tiled Floor Before Renovation Coulsdon Quarry Tiled Floor Before Renovation Coulsdon

Removing Screed from Quarry Tiles

The Quarry tiles in the WC hadn’t been covered in Lino so they would just need a good clean and seal so the main work would be in the Hallway and Kitchen. Fortunately my customer was having a lot of other work done in the house and was in the middle of stripping the walls so I didn’t need to worry too much about protecting the skirting boards etc.

Working in sections I soaked the screed in water and then carefully chipped away at it until it came loose, it was slow work but I could see the process was working as expected and eventually all the Quarry tiles were revealed. There was still a lot of cement from the screed stuck to the surface of the tile so after sweeping up the chippings I set to work applying a strong solution of Tile Doctor Grout Clean-up to the tiles and leaving it to soak in for a short while. Grout Clean-Up is an acidic product that we normally use for removing grout smears from the surface of tiles. The solution was scrubbed in and then rinsed off with water and extracted with a wet vacuum.

Quarry Tiled Floor After Renovation Coulsdon Quarry Tiled Floor After Renovation Coulsdon

To get the tiles in the toilet clean I gave them a good scrub with Tile Doctor Pro-Clean which is a reliable and effective Tile and Grout cleaner. Once clean they were rinsed with water and dried with the wet vacuum.

Sealing Quarry Tiles

I had timed my visit between working being carried out at the property so I was able to leave the floor for a few days so it could thoroughly dry out. I returned later to check the Quarry tiles were dry and completed the renovation by sealing the floor with Tile Doctor Seal and Go which is a water based sealer that works really well on Quarry tiles. Five coats of Seal and Go were needed to fully seal the tiles and the floor now looks transformed.

The owner was very satisfied with the improvements and before leaving I advised to cover the floor before starting the decorating work.
 
 
Source: Quarry Tile Cleaning and Sealing Service in South London