Victorian Quarry Tiled Floor Restoration in Harborne, Birmingham

A property developer contacted me about an old Victorian Quarry tiled floor that they needed to make good at their customers house in Harborne following renovations. The work needed to be done professionally and more work was anticipated restoring the original Victorian tiled floor in the adjacent hallway which I’ll detail in a separate article.

Quarry Tiled Floor Before Renovation Harborne

I went over to survey the floors and provide a quote for completing the work. The house dated from the 1800’s and the Quarry tiles in the front room were black and buff coloured. In fact, after I did a test clean the buff coloured tiles turned out to be deep red in colour, but the floor was that dirty you would never know it. There were also areas of missing tiles where replacements would be needed to match the rest of the floor. We discussed a price for the work, which was readily agreed, and the work booked in.

Quarry Tiled Floor Before Renovation Harborne

Cleaning and Repairing a Quarry Tiled Living Room Floor

Before starting work, I managed to source approximately 90 replacement tiles from a reclamation yard which were delivered to site. Once they had arrived, I began the tiling work by building up the sub floor with some levelling cement. When this had hardened, I started laying the tiles with a quick setting adhesive. Some needed cutting to size which was carefully completed. Once the tiles had been positioned, I grouted the area and the floor was then allowed to dry.

Quarry Tiled Floor During Renovation Harborne Quarry Tiled Floor During Renovation Harborne

The floor was then cleaned using a combination of Tile Doctor Pro-Clean and Remove and Go, scrubbed in with a black scrubbing pad. The floor needed a couple of goes to get it completely clean, and there were also some screed areas which were treated with Tile Doctor Grout Clean Up. The floor was then rinsed, next we applied more of the Tile Doctor Grout Clean Up this time to the whole floor to give it an acid rinse. The floor was then rinsed again and then allowed to dry for a couple of days.

Quarry Tiled Floor During Renovation Harborne

Sealing a Quarry Tiled Living Room Floor

On return the was sealed with three coats of Tile Doctor Colour Grow which was left to soak in and then buffed off. This product impregnates the pores if the Quarry tiles enhancing the red and black colours whilst proving protection from staining going forward.

Quarry Tiled Floor After Renovation Harborne

You can see from the photographs the transformation that was achieved. If you look closely you can notice a difference between the original and reclaimed tiles but this will be less noticeable over time.

Quarry Tiled Floor After Renovation Harborne

Before leaving I left the client with a complimentary bottle of Tile Doctor Neutral Tile Cleaner to help maintain the tiles appearance and protect the seal. He was over the moon with the job.

 

Source: Quarry Tile Cleaning and Restoration Service in Harborne, Birmingham

Replacing and Restoring Flood Damaged Quarry Tiles in Bearwood, Smethwick

My client contacted me regarding their quarry tiled floor which hadn’t been in a good condition for some time. A recent flood in the house, caused by a ruptured pipe in an upstairs boiler had only added to the problem. As you can see from the before pictures, the floor was in a sorry state. On the plus side the flood had led to an insurance claim which would cover the cost of the restoration.

I visited the property and did a test clean on a section of Quarry tiles which came up well. The client was happy the result and agreed to go ahead, my quote was agreed, and the job booked in. The property was in Bearwood which is in the southern part of the Birmingham suburb of Smethwick.

Flood Damaged Quarry Tiled Floor Before Cleaning Bearwood

Cleaning and Repairing a Quarry Tiled Kitchen Floor

The client also needed some Quarry tiles replacing due to them being broken and damaged. So before returning my first task was to source some replacement quarry tiles that would be a good match for the existing. Fortunately Quarry tiles are still popular and I was able to find a set of reclaimed tiles that would make good replacements.

I was able to get the replacements delivered in time for the job starting which was just as well as my first task would be to repair the floor. Fitting the replacements was tricky work as some of the tiles were up to two inches thick and came in various sizes and so had to be cut to size with a wet tile cutter. The tiles were a good match though and they were set in place. Later that day I was able to grout them in using a matching grout along with some other areas that needed re-grouting. By the end of the first day the floor was already looking much improved.

Flood Damaged Quarry Tiled Floor During Repair Bearwood Flood Damaged Quarry Tiled Floor During Repair Bearwood

The next day the floor was cleaned with a strong solution of Tile Doctor Pro-Clean. The solution is left on the tiles to dwell for about ten minutes so it can start to soak into the deep-seated dirt and break it down. The tiles were then scrubbed with a black pad fitted to a weighted rotary machine. The grout was also cleaned at this point using more Pro-Clean and a hand-help scrubbing brush.

There was also a fireplace hearth that needed cleaned, this also had to be cleaned by hand as the machine was too large. The floor was then rinsed with water and the resultant slurry extracted with a wet vacuum.

Flood Damaged Quarry Tiled Floor Before Cleaning Bearwood

The last part of the cleaning process was to give the tiles and acid-wash using a dilution of Tile Doctor Grout Clean-Up. This is an acidic product that can remove mineral staining and will also counter any alkaline salt deposits in the pores of the tile that could surface as the floor dries later. The floor was rinsed again and allowed to dry out for two days before I returned.

Sealing a Quarry Tiled Hallway Floor

On the final day I first confirmed the Quarry tiles had dried out were ready for sealing. I then sealed the tiles using Tile Doctor Colour Grow which is a fully breathable sealer that would protect whilst allowing moisture in the floor to rise through the tile. This sealer will also enhance the strong natural colour of the quarry tiles. The tiles were quite porous so four coats of sealer were needed, then after drying the floor was buffed with a white pad.

Flood Damaged Quarry Tiled Floor After Restoration Bearwood

The work transformed the floor and my customer was over the moon with the end result.

Flood Damaged Quarry Tiled Floor After Restoration Bearwood

For after-care I left the customer with a complimentary bottle of Tile Doctor Neutral Tile Cleaner. This is a pH neutral product that is safe to use on sealed surfaces and won’t prematurely erode the sealer.

 

Source: Quarry Tile Cleaning and Sealing Service in Bearwood, Birmingham