Quarry Tile and Grout Cleaned and Sealed in Royston, Yorkshire

We were contacted about this modern quarry tile floor in the kitchen of a farmhouse in Royston, Barnsley. They were fed up of the grout making the floor look grotty and whatever they tried they couldn’t get the grout to look any better. They explained they had used lots of different cleaning products on the market, and had spent a fortune, but the floor still looked the same. Royston is a village right on the border of Barnsley and Wakefield, it’s situated in South Yorkshire but is historically a part of the West Riding of Yorkshire.

The trouble with Grout is its cementitious texture which traps dirt and I suspect that they were using a single bucket to apply and rinse their mop during cleaning. This results in the mop being rinsed in increasingly dirty water which is put back on the floor where it is brushed into the grout where it gets trapped. Ideally you should use two buckets, one containing the cleaning fluid and the second containing water where you rinse your mop afterwards.

Quarry Tiled Kitchen Floor Before Cleaning

There are several solutions ranging from continual grout cleaning through to replacing the grout which is expensive. In this case the Quarry tiles were the small 6in x 6in format which covered the entire ground floor of this old farmhouse and with the grout lines being 10mm wide replacing the grout would have been a mammoth effort.

My recommendation was to deep clean the Quarry tiles and grout, removing any sealer from the tiles in the process and then reseal the tiles and the grout to protect both from ingrained dirt. I demonstrated the process on a small test area to see how the floor would respond and much to the client’s surprise there was an immediately and dramatic improvement. They were more than happy to go ahead with my quote and get the floor sorted.

Deep Cleaning Quarry Tiled Kitchen Tiles and Grout Floor

We started by soaking manageable areas of the floor in a strong dilution of Tile Doctor Pro-Clean, it was left to work its magic for ten minutes before a rotary machine fitted with a rotary brush was used to scrub the floor. The slurry was then extracted using a wet vac before the floor was thoroughly rinsed with clean water then extracted with the wet vac again.

Quarry Tiled Kitchen Floor During Cleaning

The floor was quite large, so it took most of the day to repeat this process across the entire area scrubbing by hand where necessary to remove stubborn staining. By the end of the day the Quarry tile and grout was looking much cleaner and brighter and I had now doubt that once the floor had been sealed the customer would be really pleased with the result. The floor was left overnight so it would be ready for sealing the next day.

Quarry Tiled Kitchen Floor During Cleaning

Sealing a Quarry Tiled Kitchen Floor

I returned the following morning and started by testing the floor was dry using a moisture meter. Applying a sealer to a damp floor would be counter productive as the seal would not cure. The floor was dry, so we applied an impregnating sealer to the Quarry tile and Grout called Tile Doctor Ultra-Seal. This is a penetrating sealer which doesn’t affect the look of the tile or darken the grout. It’s a natural look sealer which won’t make the floor shiny but is formulated to provide maximum stain protection. It is also an excellent grout sealer so will help keep the grout lines looking great.

Quarry Tiled Kitchen Floor After Cleaning

They were over the moon with the new look floor!

For after I recommended the use of Tile Doctor Neutral Tile Cleaner which will keep the floor in the best condition. It is pH balanced so will won’t prematurely erode the sealer like the stronger products you find in supermarkets which can break down sealers with constant use.

 

Source: Quarry Cleaning and Sealing Service in Royston, South Yorkshire

Renovating a Quarry Tiled Hearth in Wilmslow, Cheshire

We received an inquiry from a client in Lindow End near Wilmslow Golf Club in the Cheshire stockbroker belt. They were restoring their home and were unhappy with the state of the Quarry tiled hearth under their log burning stove. We arranged a site visit to survey the tile and grout and provide a quote for restoring the appearance. The village is situated in what’s known as the ‘Cheshire Golden Triangle’ which is one of the most sought-after places to live in the UK after London. As a result, we often find ourselves in this area working on some very nice properties, so it wasn’t long before we were able to call in and survey the tiles.

Quarry Tiled Hearth Before Grout Colouring Lindow End

As you can see from the pictures the hearth was quite dirty and the grouting had discoloured from years of use of the wood burner. The work here was a minor part of their restoration which had included significant building work. We agreed a price to carry out the work, which should only take a day and were able to return the following week.

Cleaning a Quarry Tiled Hearth

Our first job was to cover the newly sanded and sealed wooden floors with dust sheets, so we didn’t mark them as we came in the front door to the lounge. We always try and make as little mess as possible and we are always as careful as possible.

We then sprayed Tile Doctor Pro-Clean on the fire hearth tiles. This is a multi-purpose tile and grout cleaner which would make light work of the dirty tiles. The product was left to soak into the Quarry tile and grout for about twenty minutes before being scrubbed in. The hearth was a small area, so this was done by hand and then washed down with clean water.

The dirty residue was removed using a wet vacuum then the tiles where wiped down with a clean micro fibre cloth. We then dried off the tiles using a little encouragement with a heat gun to speed up the drying process. Speed drying the tile and grout in this manor would allow us to complete the work in one visit.

Applying Sandstone Grout Colourant

Once the tiles and grout lines were dry it was clear that years of dirt and soiling had stained the grout, so although no much cleaner it was clear more work would be needed to give the grout a fresh and consistent appearance.

To address this issue with the grout we selected to apply a Sandstone Tile Doctor Grout Colourant. This is applied with a small brush and brushed it into the grout lines. It is quite a precise job but any colourant that goes onto the tiles is removed with a baby wipe before it dries. This process really transformed the look of the grout, the colourant also forms a barrier over the grout which will protect it going forward and make it easier to clean.

Sealing Quarry Tiles

The Quarry tiles were then given a coat of Tile Doctor Colour Grow which is an impregnating colour enhancing sealer. This brings out the best in the quarry tiles and adds protection against future staining which will be needed given its location.

Quarry Tiled Hearth After Grout Colouring Lindow End

The client was very happy with the finish, in fact the hearth looked like it had been newly tiled, the impact of the recoloured grout was that striking. Sometimes the smallest jobs can be the most rewarding.

 

Source: Quarry Tile Cleaning and Restoration Service in Wilmslow, Cheshire

Old Quarry Tiled Floor Renovated in Bury

We received an unusual request from the owner of an old cottage in Bury who was unhappy with the state of the grouting in their Kitchen. The customer advised us that the floor was very old and originally grouted with a lime mortar also that they had been in touch with several companies before contacting us including tilers and masons and none of them was interested.

Intrigued I paid the customer a visit to survey the floor and work out the best way to renovate the grout. The cottage turned out to be three hundred years old and the owner wanted to keep the Quarry tiled floor which was laid in a Herringbone pattern and still in good condition as a period feature as it complemented the rustic look of the cottage.

Lime Mortar Grout Before Restoration Bury Cottage

After testing the floor, I was able to confirm it was indeed Lime Mortar which was historically used on walls and natural stone floors until the 19th century when it was replaced by cement. The mortar was now grubby and had shrunk in places where it had then been topped up with conventual grout resulting in a patchy appearance.

Lime Mortar Grout Before Restoration Bury Cottage

I felt simply cleaning the grout wouldn’t resolve the irregular look so my suggestion was to use a grout colourant that would sit on the surface of the grout and provide a uniform appearance. I must point out that the Grout Colourants used by Tile Doctor are not like grout pens you see on home make over shows, they are much more effective.

Applying a Grout Colourant to Lime Mortar

Happy to go with my recommendation I set about preparing and cleaning the Quarry tile and mortar with a strong dilution of Tile Doctor Pro-Clean. This is sprayed onto the floor and then scrubbed in with a buffing machine fitted with a scrubbing pad. This action turns the cleaning solution into a slurry as the dirt is lifted out of the floor which is then rinsed off with water and extracted with a wet vacuum. Tile Doctor do sell a Grout Colourant Pre-Treater product that has been especially designed for this purpose however it’s slightly acidic and so not something I would recommend for use on lime mortar.

Lime Mortar Grout During Cleaning Bury Cottage

Once the floor had dried, I started with the grout colouring which is painted onto the surface with a small brush. Two thin coats of natural grey colourant were applied and any excess that came into contact with the quarry tile was quickly wiped off with a cloth. The product dries within two hours but takes twenty-four hours to fully harden.

Lime Mortar Grout After Restoration Bury Cottage

I think you will agree the results speak for themselves and made the area look nearly new! My client was certainly impressed and left the following feedback which says it all:

Kamila was professional, courteous and very hard working. I am delighted by the job done on a very old difficult tiled floor. I would not hesitate to use Tile Doctor again or in recommending them to a friend. – Mrs Law, Bury

 

Source: Quarry Tile Cleaning and Restoration Service in Bury, South-Lancashire

Tired Quarry Tile & Grout Renovated in Outwood, Surrey

This client who lived in a property in the Village of Outwood had a tired looking Quarry tiled floor in their lounge and asked if we could improve the look of it. I went over to take a look and can see the tiles were situated in front of a brick fireplace and added a nice rustic feel to the room that was well suited to the house.

Quarry Tiled Floor Before Renovation in Outwood Quarry Tiled Floor Before Renovation in Outwood

It had clearly been some time however since the Quarry tiles had been given a good clean and seal; the tiles were looking dull and lifeless and the grout was especially bad and had darkened with the ingrained dirt. I could see a deep clean would be required to lift the dirt out so after discussing the process we agreed a date for me to come back and renovate the floor.

Quarry Tiled Floor Before Renovation in Outwood Close Up

Deep Cleaning Quarry Tile and Grout

When I returned to clean the floor my first task was to protect any areas that may be impacted by the cleaning process which in this case related to the adjacent carpet.

To be able to reach into the pores of the tile and grout and lift out the dirt I needed to remove any remaining sealer. To do this I applied a medium dilution of Tile Doctor Remove and Go which is a strong coatings remover and cleaner that’s ideal for these situations. The product is left to dwell for ten minutes, so it can get to work breaking down the old sealer and dirt and is then scrubbed into the floor. Normally I use a black scrubbing pad fitted to a rotary machine running on slow speed to do this however given the size of the floor I decided to use a deck brush to scrub the tiles and a narrow grout brush along the grout lines.

The soiled cleaning solution was rinsed off the floor with water and extracted using a wet vacuum. I then inspected the floor and spot treated any areas that needed further attention with a repeat of the same process. Once I was satisfied the Quarry tile and grout was as clean as it could be, I left for the night so the floor cold dry off.

Sealing Quarry Tiles

Returning the next day, I sealed the Quarry tiles with several coats of Tile Doctor Seal and Go which adds a nice subtle sheen finish to the tiles and will provide the tiles with long lasting protection. Seal and Go is a water-based sealer so doesn’t leave a smell as it dries which is always a plus.

My client was impressed with the transformation and as I think you will agree the Quarry tiles now look much brighter and the grout has returned to a much lighter shade.

Quarry Tiled Floor After Renovation in Outwood Quarry Tiled Floor After Renovation in Outwood

 

Source: Quarry Tile Cleaning and Renovation Service in Outwood, East Surrey

Stained Quarry Tiled Steps Revitalised

The photographs below are from a set of steps outside a house in the small West Lothian town of Kirkliston near Edinburgh airport and as you can see from the photograph the Quarry Tiled steps and Grout were looking tired and now in need of a good deep clean.

External Quarry Tile Steps Before Cleaning

Cleaning Quarry Tile and Grout

To get them clean we scrubbed in a strong solution of Tile Doctor Pro-Clean, it was a small area so this was done by hand using water to rinse away the soiled cleaning solution. The process was repeated until the dirt and grime had been removed and particular attention was applied to the grout using a stiff brush and plenty of elbow grease. Cleaning tiles outside does have its advantages as there is less preparation required but drying can take longer if it’s a cold day or shady spot.

Grout Colouring Quarry Tiles

Despite our best efforts to get the grout clean there was still evidence of staining so once it was dry the grout was coloured with 2 coats of grout colourant. The top layer of grout is actually porous so it will become ingrained with dirt over time that makes cleaning very difficult, the grout colourant product we use however forms an epoxy barrier over the grout which seals the grout and makes it easy to clean. Once complete and dry the steps were finished off with a wipe down using Tile Doctor Neutral Cleaner.

External Quarry Tile Steps After Cleaning

 
 
Source: Tile, Stone and Grout Cleaning and Sealing in Edinburgh