These old red and black Victorian quarry tiles at a house in Leek, Staffordshire, were in a bit of a state as you can see from the photographs below.

Quarry Tiles Before Cleaning Quarry Tiles Before Cleaning

Cleaning old Quarry Tiles

To clean the floor I applied a 50/50 mix of Tile Doctor Pro-Clean and NanoTech Ultra Clean diluted with water which was left to soak into the floor and then worked into the tile using a rotary machine fitted with a black scrubbing pad running at a slow speed. Pro-Clean is a strong alkaline cleaner and NanoTech Ultra Clean adds tiny abrasive particles to the solution that can help lift out the dirt.

After cleaning it I noticed that in places it was not as clean as I would of liked it, so to improve it further it necessary to get on my hands and knees and scrub them with a stronger dilution of the Pro-Clean and NanoTech UltraClean solution and a small black pad. This did the trick and so final step was to neutralise the floor tiles ready for sealing by giving them a good wash with clean water and then left it overnight to dry. A Wet Vacuum comes in handy during this process for removing fluids from the floor

Sealing old Victorian Quarry Tiles

The next day I wiped it over with a damp mop to get any dirt or dust that might have settled overnight and then when it was dry again I applied four coats of Tile Doctor Seal & Go using an air mover to help dry the floor quicker between coats.

Quarry Tiles After Cleaning Quarry Tiles After Cleaning

Seal and Go adds a nice low shine to the tile and as you can see the floor looked amazing afterwards, needless to say the customer was very pleased with the transformation and left the comment below.

“I found Trevor a very professional and dedicated workman. He would not let the job finish until he had got the best result.
Miss Jackie Spencer, Leek”

Quarry Tiles After Cleaning Quarry Tiles After Cleaning

 
 
Source: Restoring old Quarry Tiles in Staffordshire