Our client in Watton had a new Quarry tiled floor laid at her home and all went well until the tiler came to seal the finished floor after grouting. Needless to say, she didn’t get the finish she was expecting and told us that the tiler had admitted that he had no clue how to address the problem and had told her to contact a specialist to do the work and was happy to cover the cost.
I shouldn’t complain as its Tile Doctor who gets called in to resolve these issues, but there does seem to be a training gap with many tilers having no clear idea how to properly finish a new floor tile installation.
The problem was immediately obvious from the photos she sent over; grout had not been completely polished off the Quarry tile surface leaving a dull haze over the floor. The floor had then been sealed and this had only served to emphasize the slightly grey, dusty and lacklustre appearance of the floor.
Removing Grout Haze from a Quarry Tiled Floor in Watton
To remove the grout haze, it would be necessary to remove the sealer first, so I spent the first part of my visit breaking it down with a powerful 2:1 dilution of Tile Doctor Pro-Clean. The solution was left to soak into the floor for about ten minutes before being scrubbed in using our Klindex rotary machine fitted with a black stripping pad. The resulting slurry was power rinsed and extracted away with our 400psi Ninja machine.
Having done this, we could see that the grout haze was still present in many areas and was becoming very pale and patchy as the tile surface dried out. With the sealer now removed I turned my attention to the removing the grout. This was rectified by applying Tile Doctor Grout Clean-Up and then rinse extracting as before. This left the floor spotlessly clean and would be ready for sealing the next day after being left to dry off overnight with the aid of our industrial dehumidifier.
Sealing Quarry Tiles in Watton
We returned to Watton on the following day to meet our client and explain the various sealing options available, from no-finish penetrating sealers to high gloss acrylics. After much discussion, we realised that the client had originally expected the finished floor to have a noticeably shinier appearance than the matt finish colour enhancer that the tiler had used but without the glare of a high shine product.
After weighing up the client’s requirement the obvious choice was to use Tile Doctor Seal & Go which is a water-based sealer with a mid-sheen finish which makes daily maintenance much easier and more effective. We applied this sealer in five thin coats by hand using microfibre cloths, allowing 30 minutes drying time between each coat.
The client was absolutely delighted with the result we achieved and said that it was exactly the way she had expected the floor to look when they originally chose the tiles.
Never use a strong cleaning product or a steam cleaner for the regular cleaning of sealed tiles as this will reduce the life of the sealer. We recommend using a specialist cleaning product such as Tile Doctor Neutral Tile Cleaner or Stone Soap for the regular cleaning of sealed surfaces, if you do use another product always read the label first, most supermarket tile cleaners are only suitable for use on Ceramic or Vinyl tiles.